Skip to main content

Brakes · Currumbin Waters, Gold Coast

Brake & Disc Rotor Repairs, Currumbin

Auto Ace Garage inspects and repairs brakes at 1/8 Leonard Parade, Currumbin Waters, including brake pads, disc rotors, calipers, brake fluid and brake system faults on all makes and models.

Brakes wear gradually, so most drivers do not notice until there is a noise or a vibration. By then the pads may be down to the backing plate and damaging the rotors.

We take the wheels off, measure the pads and rotors, check the calipers and fluid, and tell you exactly what needs doing and what does not.

Warning signs

When to book this in

Any of the following is worth a look. Most expensive repairs began as an inexpensive one that was left alone.

  • Squealing or grinding

    Squealing is often the wear indicator. Grinding usually means metal on metal, which damages the rotors.

  • Vibration when braking

    A shudder through the pedal or steering wheel often points to uneven or worn disc rotors.

  • Soft or low pedal

    A pedal that sinks or feels spongy can mean air or moisture in the fluid, or a hydraulic fault. Have it checked promptly.

  • Pulling to one side

    A car that pulls under braking may have a sticking caliper or uneven pad wear.

What we do

Brakes & Rotors at Auto Ace Garage

Brake inspection
Pads, rotors, calipers, hoses and fluid checked with the wheels off.
Brake pad replacement
Worn pads replaced with quality pads suited to your vehicle.
Disc rotor service
Rotors measured and machined or replaced when they are worn or warped.
Brake fluid replacement
Old fluid flushed and replaced to your manufacturer's specification.
Caliper and hydraulic repairs
Sticking calipers, leaks and other hydraulic faults diagnosed and repaired.

How it works

From booking to handover

  1. 01

    Inspect

    Wheels off, pads and rotors measured, calipers and fluid checked.

  2. 02

    Explain

    We tell you what is worn, what is fine and what it will take to fix.

  3. 03

    Repair and test

    Work is done once you approve it, then the brakes are bedded in and road tested.

Why it matters

Where specialist knowledge changes the outcome

  • Not every brake job needs new rotors. Measuring them against the minimum thickness tells us whether they can be machined or must be replaced.

  • A brake noise is not always the brakes. Suspension and wheel bearing faults can sound similar, so we check before we quote.

4.8

Rated by 174+ customers on Google

Read our Google reviews

Questions

Brakes & Rotors — common questions

All FAQs
How do I know if my brakes need replacing?
Common signs are squealing or grinding, vibration when braking, a soft pedal, or the car pulling to one side. Auto Ace Garage inspects the brakes with the wheels off and tells you what actually needs doing.
Do I need new rotors every time I replace the pads?
Not always. If the rotors are above the manufacturer's minimum thickness and not warped, they may be machined and reused. If they are too thin or damaged, they should be replaced.
How often should brake fluid be changed?
Your manufacturer's service schedule sets the interval. Brake fluid absorbs moisture over time, which reduces braking performance, so it should be replaced as scheduled.

Currumbin Waters, Gold Coast

Where to bring your car

Auto Ace Garage operates from a single workshop at 1/8 Leonard Parade in Currumbin Waters, just off Currumbin Creek Road, serving Currumbin, Elanora, Palm Beach, Tugun and the southern Gold Coast.

Address

1/8 Leonard ParadeCurrumbin Waters QLD 4223

Phone

0413 380 745

Opening hours

Monday – Friday
7:30am – 4:30pm
Saturday – Sunday
Closed

Book brakes & rotors in Currumbin Waters.

Auto Ace Garage quotes the work before it starts and explains what it found. Call 0413 380 745 or request a booking online.

1/8 Leonard Parade, Currumbin Waters QLD 4223 · Monday – Friday, 7:30am – 4:30pm

CallAuto Ace Garage on 0413 380 745Book a service